The Aquabot  TJET

Jet Drive Propulsion System uses a single powerful motor to both filter and drive the Aquabot Turbo T-Jet, adding reliability and long-life, while saving maintenance and replacement part costs. It has also earned Aquabot Turbo T-Jet the title of World's Fastest Pool Cleaner.
The high pressure Impeller Pump forces water through the tubes to the bottom of the Aquabot Turbo T-Jet. These streams of water pull dirt and debris to the bottom intakes where they are vacuumed into the filter bag.

Just drop Aquabot Turbo T-Jet into your pool and push a button! HALF THE COST of even the largest expensive robotic cleaner with enormous savings in electricity, water, chemicals and maintenance.

Take a single pump motor. Add a water-jet flow system with nearly 60 design patents. Throw in the industry's leading self-contained filter bag. The result is the fastest, most unique and reliable automatic swimming pool cleaner available. This also happens to be the newest edition to the Aquabot line-up.

 


Click To Enlarge

Click To Order

 

TJET features the exclusive "Power Wash" system

The Power Wash system actually "hydroscrubs" pool surfaces ... floors, walls and more ... removing stubborn fine debris like sand and de powder blowback, and larger debris like leaves, twigs, nuts, berries, etc.! No more aching back from scrubbing down the pool!

 

TJET Cleans Up with its On-Board filtration system

You want a cleaner that removes all the dirt including the dirt you can't see like algae, pollen, dust, sand and DE powder. TJET does just that with its high volume, fine filter system. No wimpy mesh bags here - like the ones that let fine particles flow right through. TJET's system filters out particles as small as two millionths of an inch!

 

You already own a so-called "automatic" pool cleaner?

Have you found it's NOT so automatic after all? Always stuck? Always in the deep end? Always misses the same spots? Over and over again? ...
Relax ... TJET Is Here!

Engineered for efficient operation, TJET vacuums in a pre-programmed pattern and its specially designed to propel it out of hoppers and "the deep end", up walls and around your pool for complete cleaning!

 

   
Power Washing

TJET's pump diverts water to the Power Washing jets on the bottom of the cleaner. There, high-pressure streams of water hydro-scrub dirt off the pool floor and walls. The loosened dirt and debris are vacuumed into the TJET.

 

   
On-board filtration system

The pump pulls in pool water, dirt and debris through the bottom mounted intakes and into the filter bag. Dirt is trapped in the bag while clean water is returned to the pool through the Jet Valve and Power Washers.

 

   
Propulsion

Water under pressure is expelled from one end of the Jet Valve, pushing TJET across the pool bottom and up the wall. The pum pauses to allow the valve flap to change position . The the pump resumes, water is forced through the other end of the Valve, propelling TJET in the opposite direction.

 

   
Cleaning Pattern

TJET's systematic cleaning pattern enables it to cover and clean the entire pool quickly and efficiently. All you have to do is set the timer located on the Power Supply for the size of your pool. TJET can also be adjusted to standard cleaning or for an overlapping pattern which will give your pool that "extra clean" touch.

 

 
Hoppers

TJET's unique Jet Valve configuration enables it to clean walls and to climb its way out of hoppers or "the deep end" unlike suction side and pressure side cleaners.

 

  

 

FREQUENTLY ASKED QUESTIONS

Does it require any installation?
No, TJETs are ready to go right out of the box and can be plugged into any standard GFCI grounded outlet. The unit is lightweight and can easily be used by any member of the family.

Does the TJET hook up to my pool filter?
No, TJET is totally independent of your pool's filter system. No bulky hoses, booster pumps or added plumbing.

How often should I use the TJET?
The TJET can be used as often as necessary. Homeowners are pleasantly surprised at the TJET's ease in keeping your pool sparkling clean.

How does it know the difference between the floor and the wall?
TJET's built in Motorola micro-processor and mercury switch system guides the TJET horizontally, vertically and laterally on any surface to complete its preprogrammed cleaning cycle.

Will it get stuck on a ladder or main drain?
TJETs can not get trapped on a ladder or main drain because they never go in one direction for more than five minutes due to its micro-processing control program; allowing it to back out of any situation it may get into.

Is it safe to use in the water while swimming?
Manufacturer suggests you do not use the TJET while swimming, however, it is completely electrically safe -- the long cord may pose a hazard to younger swimmers.

How long does the unit last (life expectancy) ?
The TJET's construction is modular so any parts needing to be replaced can be easily done so by the homeowner or WaterWorks.

How often do you have to change the parts and what parts will need to be replaced?
The bag is machine washable and should provide years of trouble free service.

What is the warranty?
Three year prorated from original date of purchase. Subject to the warranty conditions below, during the thirty-six months from original date of purchase, TJET Inc. shall make any necessary repairs, including parts and labor without charge, except for transportation costs, which shall be paid by purchaser. Our 3 year pro-rated warranty will cover up to 300 cleaning cycles or 100% of parts and labor the first year, 50% parts and labor the second year, 25% parts and labor the third year, whichever comes first. Wear and tear items, such as wheels, axles and filter bags shall not be covered.

Where can I get service?
WaterWorks is an authorized service center. We have been servicing TJETs for years. We gladly work on TJETs sent in from around the country. We can also refer you to a nationwide network of service centers possibly in your area.

 

Specifications
51 foot floating cable
Filters up to 4800 gal/hr. down to 2 microns
Brushless Pump Motor (80 GPM)
2 hour automatic shut-off
Removes debris from Algae to Large Leaves
Cleans up to 10,000 sq. ft. per cycle
Operates for less than .05 per day
Unit Weight 11 lbs.
Electrical Requirements 110v/60Hz, GFCI outlet
Specially designed and engineered for gunite and other hard surfaced pools
Lubrication: Oil-filled and Water-cooled pump-motor
Propulsion: Jet Drive
Steering: HydroJet Directional Guidance

 

 

 
  
Toll Free     1- 973-715-9525Email    sales@h2o-marketing.com
    
[ Contact Info ] [ Company Info ][ Clothing &Gear ] [ Site by John ]
 
[ Warranty, Return Policy and Price Guarantee ]
 
Visa CardMasterCardDiscover CardPaypal
 
All content and images are property of H2O marketing.

Copyright © 2007 H2O Marketing.  All Rights Reserved..